This machine is a PLC automatic control metallographic sample cutting machine, X, Y, Z directions are automatically and precisely controlled, intelligent cutting can change the feed amount according to the hardness of the material, to achieve the fastest cutting effect, cutting speed frequency conversion control, very High reliability and control ability, with four functions: (1) electronic handwheel, automatic and random switching, (2) touch screen displaying various cutting data, (3) precise positioning, (4) swing cutting, continuous cutting, reciprocating cutting, variable speed cutting Cutting mode, the cutting speed can be changed according to the hardness of the material to achieve the purpose of fast cutting. The cutting speed of cutting steel solid cylinder can reach 15mm per minute. In order to facilitate the cleaning of the cutting room and the safety of the spindle motor, we have adopted the separation of machine and electricity; the safety cover of the cutting room has a large observation window, which makes it easy for users to observe the whole process of cutting samples; LED lighting is installed in the cutting room to realize Effective lighting for the area used in the entire cutting room; the ventilation fan in the cutting room can ensure the efficient flow and discharge of various steam and smoke generated during cutting, increasing the brightness and clarity of the working room; the design is more humanized, using man-machine Engineering principles. The biggest features: low noise, convenient operation, beautiful appearance, and safe use. It is one of the necessary equipment for laboratory sample preparation.
Body form; vertical. It mainly consists of upper part (safety cover), middle part (frame), right sliding door, side door, lower frame (electrical box, tool box), fixture, flushing faucet, and cooling water tank (independent). The frequency conversion motor is directly connected to the cutting disc, with stepless speed regulation, simple design, and solid structure. The direct drive provides power transmission between the motor and the cutting disc, and ensures high efficiency, low noise, minimal maintenance and longer service life. service life.
Designed for high-volume cutting of large workpieces ZDQ-450 makes it easier to maintain machine parts and handle large workpieces. Sliding and hinged doors give you more space and unrestricted access, making it easier to load large workpieces in place. The workpiece can also be sent into the cutting chamber from three directions: top, front and left.
The working area adopts a fully enclosed structure and has a transparent protective cover for observation during cutting. It is equipped with a cooling water tank for storing coolant. Do not use tap water as coolant. After the cutting work is completed, rinse the faucet with the left side, rinse the indoor garbage Close the safety door.
two. The main technical parameters
1 Manual/Automatic can be selected by yourself
Three-axis linkage, 10-inch industrial touch screen control; in addition, it can be switched to the handwheel of the operating handle;
2 Grinding wheel diameter: Ø450X3.5XØ32;
3 Cutting feed speed: 0-15 mm/min (users can modify the setting speed according to their needs);
4 Workbench size: 550x650 mm (mm) (x*y);
5Y axis maximum travel distance; 450 (mm);
6 Z axis maximum stroke distance; 250 (mm);
7 X-axis maximum travel distance; 150 (mm);
8 Maximum cutting diameter; 170 (mm);
9 Fixtures: opening 300mm;
10 cooling water tank volume; 200 liters;
11 variable frequency motor; 7.5kw, speed; 100-3000r/min rev/min, power supply; 380V, 50HZ;
12 Dimensions; length × width × height = 1500x1450x1900 mm
13 body form; vertical;
14 weight; about 2200 (kg);
15 Power supply: three-phase five-wire 380V 50HZ: A, B, C, N
3. Equipped with main accessories
1. A set of environmental protection dust removal device
2. Two wrenches
3. One waste bin
4. Two pieces of 450X3.5X32 cutting pieces
5. Five bottles of environmentally friendly cooling lubricant
